刘伯温致力打造火热全网_性感美女毛片_日韩在线小视频_中文字幕久久欲求不满

The automotive industry has increasingly stringent requirements for automotive interiors, such as lower odor requirements. The choice of raw materials is the key to achieve low odor in automobile interior. As a major modified material commonly used in automotive interiors, how can PP achieve low odor?

Source of odor

Polymerization stage: residues of monomers, catalysts, emulsifiers, by-products, oligomers, etc. in the composition process of raw materials.

Modification stage: volatile small molecular compounds produced by the decomposition reaction of materials, additives and fillers in the formula.

Molding stage: small molecules caused by material degradation due to screw shear during injection molding.

Key to control odor of modified PP

Resin screening, filler selection, processing aids combination, molding and post-treatment process.

Effect of resin screening on odor

Peroxide method has many residues, poor controllability and high odor. The hydrogen conditioning method is not rated for adding substances, and the odor is low. Low molecular weight, wide distribution, many small molecules, large odor, and vice versa. However, the molecular weight and distribution have an impact on the molding, so it is necessary to consider and select appropriate materials. Liquid phase, body, gas phase liquid phase + gas phase; The effects of different polymerization methods, ring tube and kettle processes on odor are discussed in the review. The content of comonomer PE in copolymerized PP, the content of rubber phase in pp/pe and the effect of viscosity of rubber phase on odor are also commented.

Influence of filler selection on odor

As a filler, the silicon content and ignition loss of talc powder have an impact on the odor. Talc powder with different particle size and distribution may also affect the shear strength of the screw on PP, and then affect the odor. Metal ions such as copper and iron in talc powder can catalyze and promote the degradation of PP.

Effect of processing aids on odor of composites

The additives commonly used in polypropylene processing include hindered phenol and phosphite antioxidant, thioester heat stabilizer, hindered amine light stabilizer, stearic acid lubricant, etc. On the one hand, the participation of these additives can prevent the degradation of polypropylene in the processing process. On the other hand, if the mixture is improper or the purity is not high, the additives themselves will degrade some small molecules and then distribute them as odor.

The main products of hindered phenolic antioxidant pyrolysis are 2-tert-butyl-benzyl alcohol, methyl phenol and ethyl phenol.

The main products of thermal cracking of phosphate antioxidant are benzene and toluene.

The main products of hindered amine light stabilizer during thermal cracking are piperidine sundries.

Influence of molding and post-treatment on material odor

Drying temperature, drying time, cooling time, on-line cycle drying post-treatment will all affect the odor attack.

Functional additives reduce material odor

During the extrusion process, functional additives release useful components to form microbubbles under the action of heat and shear, and then wet small molecular substances are used to break the microbubbles at the vacuum pumping position at the rear end of the extruder, and the small molecular components contained in the microbubbles are extracted from the extruder.

Source: Jiangmen engineering plastics http://m.latexbbs.com/